HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 277

[Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 trans-delay 3 instance 1 preference Syntax preference [ ase ] [ route-policy route-policy-name ] preference View undo preference [ ase ] OSPFv3 view Default level 2: System level Parameters ase: Applies the preference to OSPFv3 external routes. If the keyword is not specified, the preference applies to OSPFv3 internal routes. route-policy route-policy-name: References a routing policy to set preference for specific routes. The name is a case-sensitive string of 1 to 63 characters. Preference: Preference of OSPFv3, in the range of 1 to 255. Description Use preference to specify a preference for OSPFv3 routes. Use undo preference to restore the default. By default, the preference for OSPFv3 internal routes is 10, and that for OSPFv3 external routes is 150. The smaller the value is, the higher the preference is. A router may run multiple routing protocols. Each protocol has a preference. When several routing protocols find multiple routes to the same destination, the route found by the protocol with the highest preference is selected. Examples # Set a preference of 150 for OSPFv3 routes. system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] preference 150 router-id Syntax router-id router-id View undo router-id OSPFv3 view Default level 2: System level 266