HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 338

system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] group test external [Sysname-bgp-af-ipv6] peer test timer keepalive 0 hold 0 preference (IPv6 address family view) Syntax preference { external-preference internal-preference local-preference | route-policy route-policy-name } View undo preference IPv6 address family view Default level 2: System level Parameters external-preference: Preference of EBGP route learned from an EBGP peer, in the range of 1 to 255. internal-preference: Preference of IBGP route learned from an IBGP peer, in the range of 1 to 255. local-preference: Preference of IPv6 BGP local route, in the range of 1 to 255. route-policy-name: Routing policy name, a string of 1 to 63 characters. The routing policy can set a preference for routes passing it. The default value applies to the routes filtered out. Description Use preference to configure preferences for EBGP, IBGP, and local routes. Use undo preference to restore the default. The bigger the preference value is, the lower the preference is. The default values of external-preference, internal-preference and local-preference are 255, 255 and 130. Examples # Configure preferences for EBGP, IBGP, and local routes as 20, 20 and 200. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] preference 20 20 200 reflect between-clients (IPv6 address family view) Syntax reflect between-clients View undo reflect between-clients IPv6 address family view 327