HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 22
Default level, Parameters, Description, Examples, Specifies an MPLS L3VPN.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Default level 1: Monitor level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed. ip-prefix-name: Specifies the IP prefix list name, a string of 1 to 19 characters. verbose: Displays detailed routing table information, including inactive routes. Without this argument, the command displays only brief information about active routes. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ip routing-table ip-prefix to display information about routes permitted by a specified prefix list. This command is usually used together with routing policy display commands. If the specified prefix list is not configured, detailed information about all routes (with the verbose keyword) or brief information about all active routes (without the verbose keyword) is displayed. Examples # Configure a prefix list named test, permitting routes with a prefix of 2.2.2.0 and a mask length between 24 and 32. system-view [Sysname] ip ip-prefix test permit 2.2.2.0 24 less-equal 32 # Display brief information about active routes permitted by the prefix list test. [Sysname] display ip routing-table ip-prefix test Routes Matched by Prefix list : test Summary Count : 2 Destination/Mask Proto Pre Cost NextHop Interface 2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2 2.2.2.1/32 Direct 0 0 127.0.0.1 InLoop0 For command output, see Table 1. # Display detailed information about both active and inactive routes permitted by IP prefix list test. [Sysname] display ip routing-table ip-prefix test verbose Routes Matched by Prefix list test : Summary Count : 2 Destination: 2.2.2.0/24 Protocol: Direct Preference: 0 IpPrecedence: Process ID: 0 Cost: 0 QosLcId: 11