HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 363
ip extcommunity-list, route-policy
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
ip extcommunity-list Syntax ip extcommunity-list ext-comm-list-number { deny | permit } { rt route-target }& View undo ip extcommunity-list ext-comm-list-number System view Default level 2: System level Parameters ext-comm-list-number: Extended community list number, in the range of 1 to 199. deny: Specifies the match mode for the extended community list as deny. permit: Specifies the match mode for the extended community list as permit. rt route-target: Specifies the RT extended community attribute, a string of 3 to 21 characters. A route-target has three forms: • A 16-bit AS number: a 32-bit self-defined number, for example, 101:3; • A 32-bit IP address: a 16-bit self-defined number, for example, 192.168.122.15:1. • A 32-bit AS number: 16-bit self-defined number, for example, 70000:3. The AS number should be no less than 65536. &: Indicates the argument before it can be entered up to 16 times. Description Use ip extcommunity-list to define an extended community list entry. Use undo ip extcommunity-list to remove an extended community list. No extended community list is defined by default. Examples # Define extended community list 1 to permit routing information with RT 200:200. system-view [Sysname] ip extcommunity-list 1 permit rt 200:200 route-policy Syntax route-policy route-policy-name { deny | permit } node node-number View undo route-policy route-policy-name [ deny | permit ] [ node node-number ] System view Default level 2: System level 352