HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 42

Networks : 192.168.1.0 Configured peers : None Triggered updates sent : 0 Number of routes changes : 0 Number of replies to queries : 0 Table 7 Command output Field Public VPN-instance name (or Private VPN-instance name) RIP process RIP version Preference Checkzero Default-cost Summary Hostroutes Maximum number of balanced paths Update time Timeout time Suppress time update output delay output count Garbage-collect time TRIP retransmit time TRIP response packets retransmit count Silent interfaces Default routes Default route cost Verify-source Networks 31 Description The RIP process runs under a public VPN instance./The RIP process runs under a private VPN instance. RIP process ID. RIP version 1 or 2. RIP route priority. Indicates whether the zero field check is enabled for RIPv1 messages. Default cost of the redistributed routes. Indicates whether route summarization is enabled. Indicates whether to receive host routes. Maximum number of load balanced routes. RIP update interval. RIP timeout time. RIP suppress interval. RIP packet sending interval. Maximum number of RIP packets sent at each interval. RIP garbage collection interval. TRIP retransmit interval for sending update requests and responses. Maximum retransmit times for update requests and responses. Number of silent interfaces, which do not periodically send updates. Indicates whether a default route is sent to RIP neighbors: • only-Means only a default route is advertised. • originate-Means a default route is advertised along with other routes. • disable-Means no default route is advertised. Cost of the default route. Indicates whether the source IP address is checked on the received RIP routing updates. Networks enabled with RIP.