HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 35

Static routing configuration commands The term "router" in this chapter refers to both routers and Layer 3 switches. delete static-routes all Syntax View delete [ vpn-instance vpn-instance-name ] static-routes all System view Default level 2: System level Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, all static routes on the public network are deleted. Description Use delete static-routes all to delete all static routes. When you use this command to delete static routes, the system will prompt you to confirm the operation before deleting all the static routes. Related commands: display ip routing-table and ip route-static. Examples # Delete all static routes on the router. system-view [Sysname] delete static-routes all This will erase all ipv4 static routes and their configurations, you must reconfigure all static routes Are you sure?[Y/N]:Y ip route-static Syntax ip route-static dest-address { mask | mask-length } { next-hop-address [ bfd control-packet [ bfd-source ip-address ] | track track-entry-number ] | interface-type interface-number [ next-hop-address ] [ bfd { control-packet [ bfd-source ip-address ] | echo-packet } ] | vpn-instance d-vpn-instance-name next-hop-address [ track track-entry-number ] } [ preference preference-value ] [ tag tag-value ] [ permanent ] [ description description-text ] undo ip route-static dest-address { mask | mask-length } [ next-hop-address | interface-type interface-number [ next-hop-address ] | vpn-instance d-vpn-instance-name next-hop-address ] [ preference preference-value ] ip route-static vpn-instance s-vpn-instance-name& dest-address { mask | mask-length } { next-hop-address [ public ] [ bfd control-packet [ bfd-source ip-address ] | track track-entry-number ] | 24