HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 390

ext-community-type Syntax ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 } View undo ext-community-type { domain-id | router-id | route-type } OSPF view Default level 2: System level Parameters domain-id type-code1: Specifies the type code for the OSPF extended community attribute of Domain ID. Valid values are 0x0005, 0x0105, 0x0205, and 0x8005. router-id type-code2: Specifies the type code for the OSPF extended community attribute of Router ID. Valid values are 0x0107 and 0x8001. route-type type-code3: Specifies the type code for the OSPF extended community attribute of Route Type. Valid values are 0x0306 and 0x8000. Description Use ext-community-type to configure the type code of an OSPF extended community attribute. Use undo ext-community-type to restore the default. By default, the type codes for the OSPF extended community attributes of Domain ID, Router ID, and Route Type are 0x0005, 0x0107, and 0x0306 respectively. Examples # Configure the type codes of OSPF extended community attributes Domain ID, Router ID, and Route Type as 0x8005, 0x8001, and 0x8000 respectively for OSPF process 100. system-view [Sysname] ospf 100 [Sysname-ospf-100] ext-communityroute-type domain-id 8005 [Sysname-ospf-100] ext-communityroute-type router-id 8001 [Sysname-ospf-100] ext-communityroute-type route-type 8000 filter-policy export Syntax filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | ospf process-id | rip process-id | static ] View undo filter-policy export [ direct | ospf process-id | rip process-id | static ] BGP-VPN instance view Default level 2: System level 379