HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 190
peer description (BGP/BGP-VPN instance view), peer dscp (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
[Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test default-route-advertise peer description (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } description description-text View undo peer { group-name | ip-address } description BGP view, BGP-VPN instance view Default level 2: System level Parameters group-name: Name of a peer group, a string of 1 to 47 characters. ip-address: IP address of a peer. description-text: Description information for the peer/peer group, a string of 1 to 79 characters. Description Use peer description to configure the description information for a peer/peer group. Use undo peer description to remove the description information of a peer/peer group. By default, no description information is configured for a peer/peer group. Create a peer/peer group before configuring a description for it. Related commands: display bgp peer. Examples # In BGP view, configure the description information of the peer group test as ISP1. system-view [Sysname] bgp 100 [Sysname-bgp] peer test description ISP1 # In BGP-VPN instance view, configure the description information of the peer group test as ISP1. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] peer test description ISP1 peer dscp (BGP/BGP-VPN instance view) Syntax peer { group-name | ip-address } dscp dscp-value undo peer { group-name | ip-address } dscp 179