HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 312
import-route (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
Parameters ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters. internal: Creates an IBGP peer group. external: Creates an EBGP peer group, which can be a group of another sub AS in the confederation. Description Use group to create a peer group. Use undo group to delete a peer group. An IBGP peer group will be created if neither internal nor external is selected. Examples # Create an IBGP peer group named test. system-view [Sysname] bgp 100 [Sysname] ipv6-family [Sysname-bgp-af-ipv6] group test import-route (IPv6 address family view) Syntax import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ] View undo import-route protocol [ process-id ] IPv6 address family view Default level 2: System level Parameters protocol: Redistributes routes from the specified protocol, which can be direct, ospfv3, ripng and static. process-id: Process ID, in the range of 1 to 65535. The default is 1. It is available only when the protocol is ospfv3 or ripng. med-value: Applies the MED value to redistributed routes. The value is in the range of 0 to 4294967295. If not specified, the cost of the redistributed route is used as its MED in the IPv6 BGP routing domain. route-policy-name: Name of a routing policy used to filter redistributed routes, a string of 1 to 63 characters. Description Use import-route to redistribute routes from another routing protocol. Use undo import-route to remove the configuration. By default, IPv6 BGP does not redistribute routes from any routing protocol. The routes redistributed using the import-route command has the INCOMPLETE origin attribute. Examples # Redistribute routes from RIPng 1. 301