HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 223

View Any view Default level 1: Monitor level Parameters process-id: RIPng process ID, in the range of 1 to 65535. interface-type interface-number: Specifies an interface by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display ripng interface to display the interface information of the RIPng process. If no interface is specified, information about all interfaces of the RIPng process will be displayed. Examples # Display the interface information of RIPng process 1. display ripng 1 interface Interface-name: Vlan-interface11 Link Local Address: FE80::20F:E2FF:FE30:C16C Split-horizon: on Poison-reverse: off MetricIn: 0 MetricOut: 1 Default route: off Summary address: 3:: 64 3:: 16 Table 42 Command output Field Interface-name Link Local Address Split-horizon Poison-reverse MetricIn/MetricOut Description Name of an interface running RIPng. Link-local address of an interface running RIPng. Indicates whether the split horizon function is enabled: • on-Enabled. • off-Disabled. Indicates whether the poison reverse function is enabled: • on-Enabled. • off-Disabled. Additional metric to incoming and outgoing routes 212