HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 59

rip input Syntax rip input View undo rip input Interface view Default level 2: System level Parameters None Description Use rip input to enable the interface to receive RIP messages. Use undo rip input to disable the interface from receiving RIP messages. By default, an interface is enabled to receive RIP messages. Examples # Disable VLAN-interface 10 from receiving RIP messages. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] undo rip input rip metricin Syntax rip metricin [ route-policy route-policy-name ] value View undo rip metricin Interface view Default level 2: System level Parameters route-policy route-policy-name: Specifies the name of a routing policy used to add an additional metric for the routes matching it. The name is a string of 1 to 63 case-sensitive characters. value: Additional metric added to received routes, in the range of 0 to 16. Description Use rip metricin to configure the interface to add a metric to the routes it receives. Use undo rip metricin to restore the default. By default, the additional metric of a received route is 0. 48