HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 232

After you execute this command, the generated RIPng default route is advertised in a route update over the specified interface. This IPv6 default route is advertised without considering whether it already exists in the local IPv6 routing table. Examples # Advertise only the default route through VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng default-route only # Advertise the default route together with other routes through VLAN-interface 101. system-view [Sysname] interface vlan-interface 101 [Sysname-Vlan-interface101] ripng default-route originate ripng enable Syntax ripng process-id enable View undo ripng [ process-id ] enable Interface view Default level 2: System level Parameters process-id: RIPng process ID, in the range of 1 to 65535. Description Use ripng enable to enable RIPng on the specified interface. Use undo ripng enable to disable RIPng on the specified interface. By default, RIPng is disabled on an interface. Examples # Enable RIPng100 on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ripng 100 enable ripng metricin Syntax ripng metricin value View undo ripng metricin Interface view 221