HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 239

[Sysname] ospfv3 1 [Sysname-ospfv3-1] bandwidth-reference 1000 default cost Syntax default cost value View undo default cost OSPFv3 view Default level 2: System level Parameters value: Specifies a default cost for redistributed routes, in the range of 1 to 16777214. Description Use default cost to configure a default cost for redistributed routes. Use undo default cost to restore the default. By default, the default cost is 1. You need to configure the default cost value for redistributed routes to advertise them throughout the whole AS. Examples # Specify the default cost for redistributed routes as 10. system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] default cost 10 default-cost (OSPFv3 area view) Syntax default-cost value View undo default-cost OSPFv3 area view Default level 2: System level Parameters value: Specifies a cost for the default route advertised to the stub area, in the range of 0 to 65535. The default is 1. Description Use default-cost to specify the cost of the default route to be advertised to the stub area. 228