HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 337
peer timer (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
[Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] peer 1:2::3:4 substitute-as peer timer (IPv6 address family view) Syntax peer { ipv6-group-name | ipv6-address } timer keepalive keepalive hold holdtime View undo peer { ipv6-group-name | ipv6-address } timer IPv6 address family view Default level 2: System level Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. ipv6-address: IPv6 address of a peer. keepalive: Specifies the keepalive interval in seconds, ranging from 0 to 21845. holdtime: Specifies the holdtime in seconds, whose value is 0 or in the range of 3 to 65535. Description Use peer timer to configure keepalive interval and holdtime interval for a peer or peer group. Use undo peer timer to restore the default. keepalive interval defaults to 60 seconds, and holdtime interval defaults to 180 seconds. The timers configured with this command are preferred to the timers configured with the timer command. If the holdtime interval is configured as 0, no keepalive message will be sent to the peer, and the peer connection will never time out. If the keepalive interval is configured as 0 and the negotiated hold time is not 0, one third of the hold time is taken as the interval for sending keepalive messages. If neither the holdtime interval nor the keepalive interval is configured as 0, the holdtime interval must be at least three times the keepalive interval. After this command is executed, the peer connection is closed at once, and a new connection to the peer is negotiated using the configured hold time. Related commands: timer. Examples # Configure the keepalive interval and holdtime interval for the peer group test as 60 seconds and 180 seconds. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] group test external [Sysname-bgp-af-ipv6] peer test timer keepalive 60 hold 180 # Configure both the keepalive interval and holdtime interval for peer group test as 0 seconds, indicating the peer group will never time out. 326