HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 49
filter-policy import (RIP view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
system-view [Sysname] acl number 3000 [Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0 [Sysname-acl-adv-3000] rule 100 deny ip [Sysname-acl-adv-3000] quit [Sysname] rip 1 [Sysname-rip 1] filter-policy 3000 export filter-policy import (RIP view) Syntax filter-policy { acl-number | gateway ip-prefix-name | ip-prefix ip-prefix-name [ gateway ip-prefix-name ] } import [ interface-type interface-number ] undo filter-policy import [ interface-type interface-number ] View RIP view Default level 2: System level Parameters acl-number: Number of the ACL used for filtering incoming routes, in the range of 2000 to 3999. ip-prefix ip-prefix-name: References an IP prefix list to filter incoming routes. The ip-prefix-name is a string of 1 to 19 characters. gateway ip-prefix-name: References an IP prefix list to filter routes from the gateway. ip-prefix-name is a string of 1 to 19 characters. interface-type interface-number: Specifies an interface by its type and number. Description Use filter-policy import to configure RIP to filter the incoming routes. Use undo filter-policy import to restore the default. By default, RIP does not filter incoming routes. If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL should be configured with the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command to deny/permit a route with the specified destination and mask. The source keyword specifies the destination address of a route and the destination keyword specifies the subnet mask of the route (the subnet mask must be valid; otherwise, the configuration is ineffective). Related commands: ip ip-prefix; acl (ACL and QoS Command Reference). Examples # Reference ACL 2000 to filter incoming routes. system-view [Sysname] acl number 2000 [Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255 [Sysname-acl-basic-2000] quit 38