HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 170
filter-policy export (BGP/BGP-VPN instance view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Description Use ebgp-interface-sensitive to enable the clearing of EBGP session on any interface that becomes down. Use undo ebgp-interface-sensitive to disable the function. This function is enabled by default. Examples # In BGP view, enable the clearing of EBGP session on any interface that becomes down. system-view [Sysname] bgp 100 [Sysname-bgp] ebgp-interface-sensitive # In BGP-VPN instance view, enable the clearing of EBGP session on any interface that becomes down. (The VPN has been created.) system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-ipv4-vpn1] ebgp-interface-sensitive filter-policy export (BGP/BGP-VPN instance view) Syntax filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | ospf process-id | rip process-id | static ] View undo filter-policy export [ direct | ospf process-id | rip process-id | static ] BGP view, BGP-VPN instance view Default level 2: System level Parameters acl-number: Number of an ACL used to filter outgoing routing information, ranging from 2000 to 3999. ip-prefix-name: Name of an IP prefix list used to filter outgoing routing information, a string of 1 to 19 characters. direct: Filters direct routes. ospf process-id: Filters outgoing routes redistributed from the OSPF process with an ID from 1 to 65535. rip process-id: Filters outgoing routes redistributed from a RIP process. The ID is in the range of 1 to 65535. static: Filters static routes. Description Use filter-policy export to configure the filtering of outgoing routes. Use undo filter-policy export to remove the filtering. 159