HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 322
peer description (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
View undo peer { group-name | ipv4-address | ipv6-address } default-route-advertise IPv6 address family view Default level 2: System level Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. ipv4-address: IPv4 address of a peer. ipv6-address: IPv6 address of a peer. route-policy-name: Name of a routing policy, a string of 1 to 63 characters. Description Use peer default-route-advertise to advertise a default route to a peer/peer group. Use undo peer default-route-advertise to disable advertising a default route. By default, no default route is advertised to a peer/peer group. Using this command does not require the default route available in the routing table. With this command used, the router sends the default route unconditionally to the peer/peer group with the next hop being itself. Examples # Advertise a default route to peer 1:2::3:4. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] peer 1:2::3:4 default-route-advertise peer description (IPv6 address family view) Syntax peer { ipv6-group-name | ipv6-address } description description-text View undo peer { ipv6-group-name | ipv6-address } description IPv6 address family view Default level 2: System level Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. ipv6-address: IPv6 address of a peer. description-text: Description information for the peer/peer group, a string of 1 to 79 characters. Description Use peer description to configure the description information for a peer/peer group. 311