HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 36
Default level, Parameters, Specifies a destination MPLS L3VPN.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
interface-type interface-number [ next-hop-address ] [ bfd { control-packet [ bfd-source ip-address ] | echo-packet } ] | vpn-instance d-vpn-instance-name next-hop-address [ track track-entry-number ] } [ preference preference-value ] [ tag tag-value ] [ permanent ] [ description description-text ] undo ip route-static vpn-instance s-vpn-instance-name& dest-address { mask | mask-length } [ next-hop-address [ public ] | interface-type interface-number [ next-hop-address ] | vpn-instance d-vpn-instance-name next-hop-address ] [ preference preference-value ] View System view Default level 2: System level Parameters vpn-instance s-vpn-instance-name&: Specifies a source MPLS L3VPN. s-vpn-instance-name is a case-sensitive string of 1 to 31 characters. & indicates the argument before it can be entered up to 6 times. Each VPN has its own routing table, and the configured static route is installed in the routing tables of the specified VPNs. dest-address: Specifies the destination IP address of the static route, in dotted decimal notation. mask: Specifies the mask of the IP address, in dotted decimal notation. mask-length: Specifies the mask length, in the range of 0 to 32. next-hop-address: Specifies the IP address of the next hop, in dotted decimal notation. interface-type interface-number: Specifies the output interface by its type and number. If the output interface is a broadcast interface, such as a VLAN interface, the next hop address must be specified. vpn-instance d-vpn-instance-name: Specifies a destination MPLS L3VPN. d-vpn-instance-name is a case-sensitive string of 1 to 31 characters. If a destination VPN is specified, the router will search the output interface in the destination VPN based on the configured next-hop-address. next-hop-address public: Indicates that the specified next-hop-address is a public network address, rather than a VPN instance address. preference preference-value : Specifies the preference of the static route, in the range of 1 to 255 and defaults to 60. tag tag-value: Sets a tag value for the static route from 1 to 4294967295. The default is 0. Tags of routes are used in routing policies to control routing. For more information about routing policies, see "Routing policy configuration commands." permanent: Specifies the route as a permanent static route. If the output interface is down, the permanent static route is still active. description description-text: Configures a description for the static route, which consists of 1 to 60 characters, including special characters like space, but excluding question marks (?). bfd: Enable the bidirectional forwarding detection (BFD) function to detect reachability of the static route's next hop. Once the next hop is unreachable, the system will switch to a backup route. control-packet: Implements BFD in the control mode. echo-packet: Implements BFD in the echo mode. bfd-source ip-address: Specifies the source address of BFD packets. HP recommends you configure loopback interface address. 25