HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 219

RIPng configuration commands The term "router" in this chapter refers to both routers and Layer 3 switches. checkzero Syntax checkzero View undo checkzero RIPng view Default level 2: System level Parameters None Description Use checkzero to enable the zero field check on RIPng packets. Use undo checkzero to disable the zero field check. The zero field check is enabled by default. Some fields in RIPng packet headers must be zero. These fields are called "zero fields". You can enable the zero field check on RIPng packet headers. If any such field contains a non-zero value, the RIPng packet will be discarded. Examples # Disable the zero field check on RIPng packet headers of RIPng 100. system-view [Sysname] ripng 100 [Sysname-ripng-100] undo checkzero default cost (RIPng view) Syntax default cost cost View undo default cost RIPng view Default level 2: System level 208