HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 314
peer advertise-community (IPv6 address family view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
short-cut: If the keyword is specified for an EBGP route, the route will use the local routing management value rather than that of EBGP routes, so the preference of the route is reduced. Description Use network to advertise a network to the IPv6 BGP routing table. Use undo network to remove an entry from the IPv6 BGP routing table. By default, no route is advertised. The route to be advertised must exist in the local IP routing table, and using a routing policy makes route management more flexible. The route advertised to the BGP routing table using the network command has the IGP origin attribute. Examples # Advertise the network 2002::/16 into the IPv6 BGP routing table. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] network 2002:: 16 peer advertise-community (IPv6 address family view) Syntax peer { group-name | ipv4-address | ipv6-address } advertise-community View undo peer { group-name | ipv4-address | ipv6-address } advertise-community IPv6 address family view Default level 2: System level Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. ipv4-address: IPv4 address of a peer. ipv6-address: IPv6 address of a peer. Description Use peer advertise-community to advertise the COMMUNITY attribute to a peer/peer group. Use undo peer advertise-community to remove the configuration. By default, no COMMUNITY attribute is advertised to any peer group/peer. Examples # Advertise the COMMUNITY attribute to the peer 1:2::3:4. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-community 303