HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 283

Keywords suppress-policy origin-policy attribute-policy Function Used to create a summary route and suppress the advertisement of some summarized routes. If you want to suppress some routes selectively and leave other routes still advertised, use the if-match clause of the route-policy command. Selects only routes satisfying the routing policy for route summarization. Sets attributes except the AS_PATH attribute for the summary route. The same work can be done by using the peer route-policy command. Description Use aggregate to create an IPv6 summary route in the IPv6 BGP routing table. Use undo aggregate to remove an IPv6 summary route. By default, no summary route is configured. Examples # In IPv6 address family view, create a summary of 12::/64 in the IPv6 routing table. system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] aggregate 12:: 64 balance (IPv6 address family view) Syntax balance number View undo balance IPv6 address family view Default level 2: System level Parameters number: Number of BGP routes participating in load balancing , in the range of 1 to 8. When it is set to 1, load balancing is disabled. Description Use balance to configure the number of routes participating in IPv6 BGP load balancing. Use undo balance to restore the default. The feature is not available by default. Unlike IGP, BGP has no explicit metric for making load balancing decision. Instead, it implements load balancing by defining its routing rule. Related commands: display bgp ipv6 routing-table. Examples # Set the number of routes participating in IPv6 BGP load balancing to 2. 272