HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 71
authentication-mode
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
not-advertise: Disables advertising the summary route. If the keyword is not specified, the route is advertised. tag tag: Specifies a tag value for the summary route, used by a routing policy to control summary route advertisement, in the range of 0 to 4294967295. The default is 1. Description Use asbr-summary to configure a summary route. Use undo asbr-summary to remove a summary route. No ASBR route summarization is configured by default. With the asbr-summary command configured, an ASBR summarizes redistributed routes that fall into the specified address range into a single route. If the ASBR resides in an NSSA area, it advertises the summary route in a Type-7 LSA into the area. With the asbr-summary command configured, an NSSA ABR summarizes routes described by Type-5 LSAs translated from Type-7 LSAs into a single route and advertises the summary route to other areas. This command does not take effect on non NSSA ABRs. If the undo asbr-summary command is used, summarized routes will be advertised. Related command: display ospf asbr-summary. Examples # Summarize redistributed static routes into a single route, and specify a tag value of 2 and a cost of 100 for the summary route. system-view [Sysname] ip route-static 10.2.1.0 24 null 0 [Sysname] ip route-static 10.2.2.0 24 null 0 [Sysname] ospf 100 [Sysname-ospf-100] import-route static [Sysname-ospf-100] asbr-summary 10.2.0.0 255.255.0.0 tag 2 cost 100 authentication-mode Syntax authentication-mode { md5 | simple } View undo authentication-mode OSPF area view Default level 2: System level Parameters md5: Specifies the MD5 authentication mode. simple: Specifies the simple authentication mode. Description Use authentication-mode to specify an authentication mode for the OSPF area. Use undo authentication-mode to remove the authentication mode. 60