HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 46

ip-address { mask | mask-length }: Displays route information about a specified IP address. peer ip-address: Displays all routing information learned from a specified neighbor. statistics: Displays the route statistics, including total number of routes and number of routes of each neighbor. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display rip route to display the routing information of a specified RIP process. Examples # Display all routing information of RIP process 1. display rip 1 route Route Flags: R - RIP, T - TRIP P - Permanent, A - Aging, S - Suppressed, G - Garbage-collect Peer 111.1.1.2 on Vlan-interface11 Destination/Mask Nexthop Cost Tag Flags Sec 122.0.0.0/8 111.1.1.2 1 0 RA 22 Table 10 Command output Field Route Flags Peer 21.0.0.23 on Vlan-interface11 Destination/Mask Nexthop Cost Tag Flags Sec Description • R-RIP route. • T-TRIP route. • P-The route never expires. • A- he route is aging. • S-The route is suppressed. • G- he route is in Garbage-collect state. Routing information learned on a RIP interface from the specified neighbor. Destination IP address and subnet mask. Next hop of the route. Cost of the route. Route tag. Indicates the route state. Remaining time of the timer corresponding to the route state. # Display the routing statistics of RIP process 1. display rip 1 route statistics Peer Aging Permanent Garbage 35