HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 267
import-route (OSPFv3 view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
View undo graceful-restart interval OSPFv3 view Default level 2: System level Parameters interval-value: GR restart interval, in the range of 40 to 1800 seconds. Description Use graceful-restart interval to configure the GR restart interval. Use undo graceful-restart interval to restore the default. By default, the GR restart interval is 120 seconds. The value of the GR restart interval cannot be smaller than the maximum OSPFv3 neighbor dead time of all the OSPFv3 interfaces; otherwise, GR restart may fail. Related commands: ospfv3 timer dead. Examples # Configure the GR restart interval for OSPFv3 process 1 as 100 seconds. system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] graceful-restart interval 100 import-route (OSPFv3 view) Syntax import-route protocol [ process-id | allow-ibgp ] [ cost value | route-policy route-policy-name | type type ] * undo import-route protocol [ process-id ] View OSPFv3 view Default level 2: System level Parameters protocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, ospf v3, ripng, or static. process-id: Process ID of the routing protocol, in the range of 1 to 65536. It defaults to 1. This argument takes effect only when the protocol is ospfv3, or ripng. allow-ibgp: Allows redistributing iBGP routes. This keyword takes effect only the protocol is bgp4+. cost value: Specifies a cost for redistributed routes, ranging from 1 to 16777214. The default is 1. route-policy route-policy-name: Redistributes only the routes that match the specified routing policy. route-policy-name is a case-sensitive string of 1 to 63 characters. type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2. 256