HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 56

reset rip 100 statistics rip Syntax rip [ process-id ] [ vpn-instance vpn-instance-name ] View undo rip [ process-id ] [ vpn-instance vpn-instance-name ] System view Default level 2: System level Parameters process-id: RIP process ID, in the range of 1 to 65535. The default is 1. vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the RIP process will run under the public network. Description Use rip to create a RIP process and enter RIP view. Use undo rip to disable a RIP process. By default, no RIP process runs. You must create a VPN instance before you apply a RIP process to it. For related configuration, see the ip vpn-instance command in the MCE Command Reference. You must enable the RIP process before configuring the global parameters. This limitation is not for configuration of interface parameters. The configured interface parameters become invalid after you disable the RIP process. Examples # Create a RIP process and enter RIP process view. system-view [Sysname] rip [Sysname-rip-1] rip authentication-mode Syntax rip authentication-mode { md5 { rfc2082 [ cipher ] key-string key-id | rfc2453 [ cipher ] key-string } | simple [ cipher ] password } View undo rip authentication-mode Interface view Default level 2: System level 45