HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 45
display rip route
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Field Address/Mask Version MetricIn MetricIn route policy MetricOut MetricOut route policy Split-horizon Poison-reverse Input/Output Default route Current packets number/Maximum packets number Description IP address and mask of the interface. RIP version running on the interface. Additional routing metric added to the incoming routes. Name of the routing policy used to add the additional routing metric for the incoming routes. If no routing policy is referenced, the field displays Not designated. Additional routing metric added to the outgoing routes. Name of the routing policy used to add the additional routing metric for the outgoing routes. If no routing policy is referenced, the field displays Not designated. Indicates whether split-horizon is enabled: • on-Enabled. • off-Disabled. Indicates whether poison-reverse is enabled: • on-Enabled. • off-Disabled. Indicates if the interface is allowed to receive (Input) or send (Output) RIP messages: • on-Means it is allowed. • off-Means it is not allowed. Indicates whether sending the default route to RIP neighbors is allowed: • on-Means it is allowed. • off-Means it is not allowed. Packets to be sent/Maximum packets that can be sent on the interface. display rip route Syntax View display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters process-id: RIP process ID, in the range of 1 to 65535. 34