HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Comma - Page 245
display ospfv3 lsdb
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
FE80::1441:0:E213:1 (Link-Local Address) 2000:1::1 OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0 Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562 Transmit Delay is 1 sec, State Point-To-Point, Priority 1 No designated router on this link No backup designated router on this link Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5 Hello due in 00:00:02 Neighbor Count is 1, Adjacent neighbor count is 1 Table 46 Command output Field Interface ID IPv6 Prefixes OSPFv3 Process Area Instance ID Router ID Network Type Cost Transmit Delay State Priority No designated router on this link No backup designated router on this link Timer interval configured Hello due in 00:00:02 Neighbor Count Adjacent neighbor count Description Interface ID. IPv6 Prefix. OSPFv3 Process. Area ID. Instance ID. Router ID. Network type of the interface. Cost value of the interface. Transmission delay of the interface. Interface state. DR priority of the interface. No designated router on this link. No backup designated router on this link. Time intervals in seconds configured on the interface: • Hello-Hello interval. • Dead-Dead interval. • Wait-After this timer expires, the interface quits from the waiting state. • Retransmit-LSA retransmission interval. Hello packet will be sent in 2 seconds. Number of Neighbors on the interface Number of Adjacencies on the interface display ospfv3 lsdb Syntax display ospfv3 [ process-id ] lsdb [ [ external | inter-prefix | inter-router | intra-prefix | link | network | router | grace ] [ link-state-id ] [ originate-router router-id ] | total ] [ | { begin | exclude | include } regular-expression ] 234