Netgear GSM4248P User Manual - Page 138

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 38. PoE classes and PoE power allocations (Continued) Device Compatible PoE Class Standard 7 PoE++ 8 PoE++ Class Description Ultra high power Ultra high power Maximum Power Reserved for the PD 75.0W 90.0W Power Delivered to the PD 62.0W-81.1W 71.0W-96.5W Configure the global PoE settings To configure the global PoE setting: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > PoE > Basic > PoE Configuration. The PoE Configuration page displays. 6. In the System Usage Threshold field, enter a number from 1 to 99 to set the threshold level at which a trap is sent if the consumed power exceeds the threshold power. 7. From the Power Management mode menu, select the power management algorithm that the switch uses to deliver power to the requesting PDs: • Static: Select Static to specify that the power allocated for each port depends on the type of power threshold that is configured on the port. • Dynamic: Select Dynamic to specify that the power consumption on each port is measured and calculated in real time. This is the default setting. 8. To set the traps, in the PoE Trap Configuration section, select one of the following radio buttons: • Enable: Activates the PoE traps. This is the default setting. • Disable: Deactivate the PoE traps. Configure Switch System 138 Information Main User Manual