Netgear GSM4248P User Manual - Page 575

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 153. Private group membership information Field Group Name Group Mode Description The name of the private group. The mode of the private group (Community or Isolated). Protect ports If a port is configured as protected, it does not forward traffic to any other protected port on the switch, but it does forward traffic to unprotected ports. You can configure ports as protected or unprotected. To configure protected ports: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Traffic Control > Protected Ports. The Protected Ports page displays. 6. From the Group ID list, select 0, 1, or 2 to combine the selected protected ports in a logical group. Traffic can flow between protected ports belonging to different groups, but not within the same group. The group ID can be 0, 1, or 2. 7. To associate a name with the protected ports group, specify a name in the Group Name field. The name can be up to 32 alphanumeric characters long, including blanks. Manage Switch Security 575 Main User Manual