Netgear GSM4248P User Manual - Page 388

AV Line of Fully Managed Switches M4250 Series Main User Manual 13. If you select Encrypt from he Authentication Type menu, in the Authentication Key ID field, enter the RIP authentication Key ID for the interface. The key ID can from 0 to 255. 14. Click the Apply button. Your settings are saved. 15. To refresh the page, click the Refresh button. 16. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 106. RIP interface configuration information Field Bad Packets Received Bad Routes Received Updates Sent IP Address Link State Description The number of RIP response packets received by the RIP process that were subsequently discarded for any reason. The number of routes in valid RIP packets that were ignored for any reason (for example, unknown address family, or invalid metric). The number of triggered RIP updates sent on the interface. This explicitly does not include full updates sent containing new information. The IP address of the router interface. Indicates if the RIP router interface is up or down. Configure the RIP route redistribution settings and display the route redistribution summary You can configure the RIP route redistribution settings and display the route redistribution summary. To configure RIP route redistribution settings and display the route redistribution summary: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. Manage Routing 388 Main User Manual