Netgear GSM4248P User Manual - Page 474

AV Line of Fully Managed Switches M4250 Series Main User Manual 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Class Configuration. The Class Configuration page displays. 6. Click the class name, which is a hyperlink. The page on which you can change the class configuration displays. 7. Change the class configuration as needed. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Delete a DiffServ class To delete a DiffServ class: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Class Configuration. The Class Configuration page displays. 6. Select the check box next to the class name. 7. Click the Delete button. The class is removed. 8. To save the settings to the running configuration, click the Save icon. Configure Quality of Service 474 Main User Manual