Netgear GSM4248P User Manual - Page 70

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 16. SNTP global status information (Continued) Field Last Attempt Status Description The status of the last SNTP request or unsolicited message for both unicast and broadcast modes. If no message was received from a server, a status of Other is displayed. These values are appropriate for all operational modes. • Other: None of the following enumeration values. • Success: The SNTP operation was successful and the system time was updated. • Request Timed Out: A directed SNTP request timed out without receiving a response from the SNTP server. • Bad Date Encoded: The time provided by the SNTP server is not valid. • Version Not Supported: The SNTP version supported by the server is not compatible with the version supported by the client. • Server Unsynchronized: The SNTP server is not synchronized with its peers. This is indicated through the leap indicator field on the SNTP message. • Server Kiss Of Death: The SNTP server indicated that no further queries were to be sent to this server. This is indicated by a stratum field equal to 0 in a message received from a server. Server IP Address The IP address of the server for the last received valid packet. If no message was received from any server, an empty string is shown. Address Type The address type of the SNTP server address for the last received valid packet. Server Stratum The claimed stratum of the server for the last received valid packet. Reference Clock ID The reference clock identifier of the server for the last received valid packet. Server mode The mode of the server for the last received valid packet. Unicast Server Max Entries The maximum number of unicast server entries that can be configured on this client. Configure Switch System 70 Information Main User Manual