Netgear GSM4248P User Manual - Page 633

AV Line of Fully Managed Switches M4250 Series Main User Manual To access the network through a captive portal, the client must first enter authentication information on an authentication web page. When the authentication session time-out expires and the client is not yet authenticated, the switch disconnects any active TCP or SSL connection with the client. The range is from 60 to 600 seconds. The default is 300 seconds. 10. Click the Apply button. Your settings are saved. 11. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable information on the page. Table 158. Captive portal global configuration information Field Operational Status Disabled Reason Description The operational status of the captive portal feature, which is either Enabled or Disabled. If the captive portal feature is disabled, the reason that it is disabled: • Administrator Disabled • IP Address Not Configured • No IP Routing Interface • Routing Disabled CP IP Address The IP address that the captive portal uses. Supported Captive Portals The total number of captive portals that are supported on the switch. Configured Captive Portals The number of captive portals that are configured on the switch. Active Captive Portals The number of captive portal that are operationally enabled (active). System Supported Users The total number of users that can be authenticated locally and remotely on the switch. Local Supported Users The total number of users that can be authenticated locally on the switch. Configured Local Users The number of local users that are configured on the switch. Authenticated Users The number of users that are authenticated for all captive portal on the switch. Configure a captive portal By default, the switch provides one default captive portal. You can change the settings for the default captive portal. You can also add and configure up to nine additional portals. Manage Switch Security 633 Main User Manual