Netgear GSM4248P User Manual - Page 194

AV Line of Fully Managed Switches M4250 Series Main User Manual To change the internal VLAN allocation settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > VLAN > Basic > VLAN Configuration. The VLAN Configuration page displays. 6. In the Internal VLAN Allocation Base field, specify the VLAN allocation base for the routing interface. The default base range of the internal VLAN is from 1 to 4093. 7. Select the Internal VLAN Allocation Policy Ascending or Descending radio button to specify the policy for the internal VLAN allocation: • Ascending: VLANs are allocated in ascending order from 2 to 4093. • Descending: VLANs are allocated in descending order from 4093 to 2. VLAN 1 is the default VLAN. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Auto-Trunk overview Auto-trunk is a feature that lets the switch automatically enable Trunk mode on capable physical links and LAG interfaces between partner devices. A trunk can carry all active VLANs. By default, the Auto-Trunk feature is enabled on the switch. If the switch automatically configures a port as a trunk (that is, an Auto-Trunk), all VLANs on the switch become part of the trunk, allowing automatic configuration of all VLANs on the switch and on the partner device with which the trunk is established. Configure Switching Information 194 Main User Manual