Netgear GSM4248P User Manual - Page 734

AV Line of Fully Managed Switches M4250 Series Main User Manual Save the configuration When you save the configuration, changes that you made are retained by the switch when it is rebooted. You can also save the settings on each configuration page of the main UI by clicking the Save icon. To save the configuration: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Maintenance > Save Config > Save Configuration. The Save Configuration page displays. 6. Select the check box. 7. Click the Apply button. Your settings are saved. If you restart the switch, the saved settings are retained. Automatic installation of the configuration file If the switch is initialized without a configuration file present on the switch, the automatic installation (auto install) process can automatically load the switch configuration from a server in the network. Configure the auto install process The auto install process requires that DHCP is enabled by default on the switch. To save the downloaded configuration to the startup configuration, you must explicitly save the Maintenance and Troubleshooting 734 Main User Manual