Netgear GSM4248P User Manual - Page 185

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 49. ISDP global configuration information Field Neighbors table last time changed Device ID Device ID Format Capability Device ID Format Description The time that the information in the neighbors table was changed. The device ID of this switch. The device ID format capability. The device ID format. Configure ISDP settings for an interface You can configure if an interface can communicate IDSP packets. To configure ISDP settings for an interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > ISDP > Advanced > Interface Configuration. The Interface Configuration page displays. 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. Configure Switch System 185 Information Main User Manual