Netgear GSM4248P User Manual - Page 610

AV Line of Fully Managed Switches M4250 Series Main User Manual • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. From the Trust Mode menu, select the trust mode: • Disabled. The interface is considered to be untrusted and could potentially be used to launch a network attack. DHCPv6 server messages are checked against the bindings database. On untrusted ports, DHCPv6 snooping enforces the following security rules: • DHCPv6 packets from a DHCPv6 server are dropped. • DHCPv6 messages are dropped if the MAC address is in the snooping database but the binding's interface is other than the interface where the message was received. • DHCPv6 packets are dropped if the source MAC address does not match the client hardware address and if MAC address validation is globally enabled. • Enabled. The interface is considered to be trusted and forwards DHCPv6 server messages without validation. 9. From the Invalid Packets menu, select the packet logging mode. When enabled, the DHCPv6 snooping feature generates a log message when an invalid packet is received and dropped by the interface. 10. In the Rate Limit (pps) field, specify the rate limit value for DHCPv6 snooping purposes. If the incoming rate of DHCPv6 packets per second exceeds the configured burst interval per second, the port shuts down. If the rate limit is None (which is the default), the burst interval is also not applicable, and rate limiting is disabled. 11. In the Burst Interval (secs) field, specify the burst interval in seconds for rate limiting on the interface. If the rate limit is N/A, the burst interval is not applicable. 12. Click the Apply button. Your settings are saved. 13. To save the settings to the running configuration, click the Save icon. Manage Switch Security 610 Main User Manual