Netgear GSM4248P User Manual - Page 170

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure the global LLDP-MED settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > LLDP > LLDP-MED > Global Configuration. The Global Configuration page displays. 6. In the Fast Start Repeat Count field, enter the number of LLDP PDUs that are transmitted when the protocol is enabled. The range is from (1 to 10). Default value of fast repeat count is 3. The Device Class field displays the switch MED classification. The switch is a Network connectivity device. The following four types of MED devices exist, of which the first three are endpoints: • Class I: Generic devices, which include IP communication controllers. • Class II: Media devices, which include conference bridges. • Class III: Communication devices, which include IP telephones. • Class IV: Network connectivity devices, which include LAN switches, routers, IEEE 802.1 bridges, and IEEE 802.11 WiFi access points. 7. Click the Apply button. Your settings are saved. 8. To save the settings to the running configuration, click the Save icon. Configure LLDP-MED interface settings You can specify LLDP-MED settings that are applied to one or more interfaces. To configure LLDP-MED interface settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. Configure Switch System 170 Information Main User Manual