Netgear GSM4248P User Manual - Page 714

AV Line of Fully Managed Switches M4250 Series Main User Manual 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Monitoring > Logs > Server Log. The Server Log page displays. 6. In the Server Configuration table, configure the following settings: • IP Address Type: Specify the IP address type of the syslog server, which can be IPv4, IPv6, or DNS. • Host Address: Specify the IP address or host name of the syslog server. • Port: Specify the port on the syslog server. The default port number is 514. • Severity Filter: Use the menu to select the severity of the logs that must be sent to the syslog server. Logs with the selected severity level and all logs of greater severity are sent to the host. For example, if you select Error, the logged messages include Error, Critical, Alert, and Emergency. The severity can be one of the following levels: • Emergency: Level 0, the highest warning level. If the device is down or not functioning properly, an emergency log is saved to the device. • Alert: Level 1, the second-highest warning level. An alert log is saved if a serious device malfunction occurs, such as all device features being down. • Critical: Level 2, the third-highest warning level. A critical log is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. • Error: Level 3, a device error occurred, such as a port being offline. • Warning: Level 4, the lowest level of a device warning. • Notice: Level 5, provides the network administrators with device information. • Informational: Level 6, provides device information. • Debug: Level 7, provides detailed information about the log. 7. Click the Add button. The syslog server is added. Monitor the Switch and Network 714 Main User Manual