Netgear GSM4248P User Manual - Page 565

AV Line of Fully Managed Switches M4250 Series Main User Manual If a packet with the MAC address and VLAN ID that you specify is received on a port that is not part of the inbound filter, the packet is dropped. 10. In the Port and LAG tables in the Destination Port Members section, select the ports and LAGs that must be included in the outbound filter. A packet with the MAC address and VLAN ID that you specify can be transmitted only from a port that is part of the outbound filter. Note: Destination ports can be included only in a multicast filter. A multicast filter is determined by the MAC address that you enter in the MAC Address field. 11. Click the Apply button. Your settings are saved. 12. To save the settings to the running configuration, click the Save icon. Delete a MAC filter You can remote an existing MAC filter that you no longer need. To delete a MAC filter: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Traffic Control > MAC Filter. The MAC Filter Configuration page displays. 6. From the MAC Filter menu, select the MAC filter. 7. Click the Delete button. The filter is removed. 8. To save the settings to the running configuration, click the Save icon. Manage Switch Security 565 Main User Manual