Netgear GSM4248P User Manual - Page 163

AV Line of Fully Managed Switches M4250 Series Main User Manual • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. The Link Status fields shows whether the interface is up or down. 7. From the Transmit menu, select if the interface can transmit LLDP notifications. The default is Enable. 8. From the Receive menu, select if the interface can receive LLDP notifications. The default is Enable. 9. From the Notify menu, select if the interface can support LLDP notifications. The default is Disable. 10. As an option, configure the following Type Length Value (TLV) information, all of which are enabled by default: • Port Description: Select if the interface can send a port description in an LLDP frame. • System Name: Select if the interface can send the system name in an LLDP frame. • System Description: Select if the interface can send the system description in an LLDP frame. • System Capabilities: Select if the interface can send the system capabilities in an LLDP frame. 11. From the Management Information menu, select if the management address is transmitted in LLDP frames. 12. Click the Apply button. Your settings are saved. 13. To save the settings to the running configuration, click the Save icon. Display or clear LLDP statistics To display or clear LLDP statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. Configure Switch System 163 Information Main User Manual