Netgear GSM4248P User Manual - Page 298

AV Line of Fully Managed Switches M4250 Series Main User Manual To add port, LAG, and VLAN descriptions: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > Ports > Port Description. The Port Description page displays. 6. Select whether to display physical interfaces, VLANs, LAGs, or all by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • VLANS: Only VLANs are displayed. • LAG: Only LAGs are displayed. • All: Physical interfaces, VLANs, and LAGs are displayed. 7. Select one or more interfaces or VLANs by taking one of the following actions: • To configure a single interface or VLAN, select the check box associated with the interface or VLAN, or type the interface or VLAN number in the Go To Interface field and click the Go button. • To configure multiple interfaces or VLANs with the same settings, select the check box associated with each interface or VLAN. • To configure all interfaces, VLANs, or both interfaces and VLANs with the same settings, select the check box in the heading row. 8. In the Description field, enter a description of up to 64 characters. 9. Click the Apply button. Your settings are saved. 10. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Configure Switching Information 298 Main User Manual