Netgear GSM4248P User Manual - Page 356

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure one or more IPv6 routing interfaces: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing> IPv6 > Advanced > Interface Configuration. The Interface Configuration page displays. 6. Select whether to display physical interfaces, VLANs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • VLANS: Only VLANs are displayed. • All: Both physical interfaces and VLANs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. From the IPv6 Mode menu, select Enable or Disable to enable or disable the IPv6 routing mode for the interface. When the IPv6 routing mode is enabled, the interface is capable of IPv6 operation without a global address. In this case, an EUI-64 based link-local address is used. The default is Disable. 9. From the DHCPv6 Client Mode menu, select Enable or Disable to enable or disable DHCPv6 client mode on the interface. Only one interface can function as a DHCPv6 client. The default is Disable. Manage Routing 356 Main User Manual