Netgear GSM4248P User Manual - Page 331

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 90. MSRP streams information Field Description Stream ID A 16-bit unsigned integer value, which is a unique ID used to distinguish the stream among multiple streams from the same device. Stream Source MAC Address The MAC address of the traffic stream's source. Received Accumulated Latency The 32-bit unsigned accumulated latency value that is used to determine the worst-case latency that a stream can suffer in its path from the talker to a listener. The latency starts with zero and is increased by one for each device that the stream propagates through in the network. Traffic Class Shows whether the stream is class A or class B. Class A traffic receives higher priority than class B traffic. Rank The 5-bit unsigned rank value that is used by devices to determine which streams can still be served when the MSRP registrations exceed the capacity of an interface to carry the corresponding data streams. If a device becomes oversubscribed (for example, a network reconfiguration or 802.11 bandwidth reduction occurs), the rank value is also used to determine which stream are dropped. A lower numeric value is more important than a higher numeric value. TSpec Max Frame Size The 32-bit unsigned bandwidth value that is used to allocate resources and adjust queue selection settings to supply the quality of service that is requested by an MSRP talker. The value represents the maximum rate, in units of 1024 octets per second, at which frames in the stream referenced by the talker can be transmitted. TSpec Max Interval Frames The 32-bit unsigned frame rate value that is used to allocate resources and adjust queue selection settings to supply the quality of service that is requested by an MSRP talker. The value represents the maximum number of frames that the talker can transmit in one second. Stream VLAN The VLAN ID of the traffic stream. Destination MAC The MAC address of the traffic stream's destination. Received Failure Information If a failure occurred, the interface of the device on which the failure occurred. Bridge Interface Configure Switching Information 331 Main User Manual