Netgear GSM4248P User Manual - Page 543

AV Line of Fully Managed Switches M4250 Series Main User Manual The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Access > Console Port. The Console Port page displays. 6. In the Serial Port Login Timeout (minutes) field, specify the time in minutes after which an inactive console port connection is automatically ended. The range is from 1 to 160 minutes. The default is 5 minutes. Entering 0 disables the time-out. 7. From the Baud Rate (bps) menu, select the default baud rate for the console port connection. You can choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud. The default is 115200 baud. 8. From the Authentication List menu, select a login authentication list. This list is used to authenticate users who try to log in to the switch. The default is defaultList. For more information about login authentication lists, see Configure a login authentication list on page 514. 9. From the Enable Authentication List menu, select an enable authentication list. This list is used to authenticate users who try to get privileged EXEC access. The default list is enableList. For more information about enable authentication lists, see Configure an enable authentication list on page 517. 10. Click the Apply button. Your settings are saved. 11. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable information that is displayed. Manage Switch Security 543 Main User Manual