Netgear GSM4248P User Manual - Page 343

AV Line of Fully Managed Switches M4250 Series Main User Manual 8. Select the ICMP Redirects Enable or Disable radio button. The default is Disable. If you enable ICMP Redirects, the switch can forward ICMP Redirects. 9. In the ICMP Rate Limit Interval field, specify the number of ICMP error packets that are allowed per burst interval. By default, the burst interval is 1000 msec (the rate limit is 100 packets/sec). The interval is from 0 to 2147483647 msec. Enter 0 to let the switch ignore the number of ICMP error packets that are allowed per burst interval. 10. In the ICMP Rate Limit Burst Size field, specify the number of ICMP error packets that are allowed for the burst size. By default, the burst size is 100 packets. The burst size range is from 1 to 200. Enter 0 to let the switch ignore the number of ICMP error packets that are allowed for the burst size. 11. To configure a global default gateway, select the Select to configure Global Default Gateway check box. Then, in the Global Default Gateway field, enter the IP address. The default gateway that you specify receives a higher preference than a default gateway that is learned from a DHCP server. You configure one default gateway only, but you can change the default gateway. 12. Click the Apply button. Your settings are saved. 13. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 93. IPv4 routing configuration information Field Default Time to Live Maximum Next Hops Description The default value inserted into the Time-To-Live field of the IP header of datagrams originated by the switch, if a TTL value is not supplied by the transport layer protocol. The maximum number of hops supported by the switch. Manage Routing 343 Main User Manual