Netgear GSM4248P User Manual - Page 406

AV Line of Fully Managed Switches M4250 Series Main User Manual The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > Multicast > IGMP > IGMP Membership. The IGMP Membership page displays. 6. To search for IGMP membership by interface or group, select one of the following options from the Search menu: • Interface: Select Interface from the menu, specify the interface in unit/port format (for example 0/8), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Group: Select Group from the menu, specify the multicast group IP address, and click the Go button. If the entry exists, that entry with the matching group IP address is displayed as the first entry, followed by the remaining entries. An exact match is required. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Table 113. IGMP membership information Field Interface Group IP Compatibility Mode Source Filter Mode Description The interface on which multicast packets are forwarded. The IP multicast group address. The group compatibility mode (v1, v2, or v3) for the group on the interface. The source filter mode (Include, Exclude, or NA) for the group on the interface. If the mode is NA, the field is blank. Configure Multicast Routing 406 Main User Manual