Netgear GSM4248P User Manual - Page 433

AV Line of Fully Managed Switches M4250 Series Main User Manual 5. Select Routing > IPv6 Multicast > IPv6 PIM > PIM Neighbor. The PIM Neighbor page displays. 6. To search for IGMP group entries by interface or group, select one of the following options from the Search menu: • Interface: Select Interface from the menu, specify the interface in unit/port format (for example 0/8), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Neighbor IP: Select Neighbor IP from the menu, specify the neighbor IPv6 address, and click the Go button. If the entry exists, that entry with the matching neighbor IPv6 address is displayed as the first entry, followed by the remaining entries. An exact match is required. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Table 122. IPv6 PIM neighbor information Field Interface Neighbor IP Up Time (hh:mm:ss) Expiry Time (hh:mm:ss) DR Priority Description The interface on which the PIM neighbor is connected. The IPv6 address of the PIM neighbor. The time that passed since the PIM device became a neighbor of the interface. The time remaining before the PIM neighbor ages out. The designated router (DR) priority of the PIM neighbor. Add an IPv6 PIM candidate rendezvous point configuration You can add an IPv6 PIM candidate rendezvous point (RP) configuration on an interface. To add an IPv6 PIM candidate RP configuration: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. Configure Multicast Routing 433 Main User Manual