Netgear GSM4248P User Manual - Page 618

AV Line of Fully Managed Switches M4250 Series Main User Manual The Dynamic Binding Configuration table shows information about the IPSG bindings that were learned on each interface on which IPSG is enabled. The following table describes the dynamic binding information. Field Interface MAC Address VLAN ID IP Address Filter Type Description The interface on which the IPSG source binding was learned. The MAC address associated with the IPSG source device. This is the key to the binding database. The VLAN ID for the interface of the IPSG source device. The IP address of the IPSG source device. The filter type used on the switch interface. Either IPSG is configured to function with the source IP address only or, if port security is also enabled for IPSG, with both the source IP address and MAC address. 11. To save the settings to the running configuration, click the Save icon. 12. To clear all dynamic bindings from the Dynamic Binding Configuration table, click the Clear button. 13. To save the settings to the running configuration, click the Save icon. Remove a static IP source guard binding You can remove a static binding from the IP source guard (IPSG) bindings database. To remove a static IPSG binding: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Control > IP Source Guard > Binding Configuration. Manage Switch Security 618 Main User Manual