Netgear GSM4248P User Manual - Page 295

AV Line of Fully Managed Switches M4250 Series Main User Manual 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > Ports > Port Configuration. The Port Configuration page display. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. From the STP Mode menu, select to enable or disable the Spanning Tree Protocol administrative mode for the port or LAG. The default is Enable. 9. From the Admin Mode menu, select to enable or disable the administrative mode for the port or LAG. For the port or LAG to participate in the network, you must select Enable. The default is Enable. 10. From the LACP Mode menu, select to enable or disable the Link Aggregation Control Protocol administrative mode for the port. The mode must be enabled for the port to participate in link aggregation. The default is Enable. 11. From the Autonegotiation menu, select to enable or disable the speed autonegotiation mode for the port. Configure Switching Information 295 Main User Manual